PiAware
자신만의 ADS-B 항공편 추적 수신기를 구축하고 싶습니까?
Key Features
- SkyAware web-based map interface displays real-time nearby flights from receiver.
- Be part of the world's largest and fastest growing ADS-B network.
- Users can connect to their PiAware over their LAN to receive all data.
- Track even more aircraft in real-time by contributing to multilateration (MLAT) calculations.
- Built easily from widely-available low-cost hardware.
- Uses free, open source software.
What is FlightAware?
FlightAware는 디지털 항공 회사로서 세계 최대의 항공편 추적 및 데이터 플랫폼을 운영합니다. 모든 항공 부문에 대한 글로벌 연결성을 갖춘FlightAware는 12,000,000명 이상의 승객뿐만 아니라 10,000개 이상의 항공기 운영사 및 서비스 제공업체에게 전 세계 항공편 추적 솔루션, 예측 기술, 분석 및 의사 결정 도구를 제공합니다.
What is PiAware?
ADS-B receivers are electronic devices that listen for radio signals from ADS-B aircraft transponders and decodes them to determine aircraft positions. FlightAware has created an open source software solution called PiAware to make aircraft data accessible to everyone. PiAware uses low-power hardware like a Raspberry Pi, a Pro Stick (an inexpensive USB adapter), and an antenna to receive signals from aircraft. Together, the software and hardware decipher and display the 1090MHz ADS-B data in SkyAware, FlightAware’s web-based map interface that allows users to view aircraft positions on a local network. The receiver also sends the data to FlightAware to provide free flight-tracking on flightaware.com.
Why Should I build a PiAware?
- Easiest way to setup an ADS-B receiver.
- Receive a complimentary FlightAware Enterprise Account which includes:
- 8 months of historical flight data.
- Unlimited flight alerts.
- Registration/tail numbers for airline/callsign flights.
- Air traffic control callsigns.
- Full screen maps without ads.
- Access SkyAware, a web-based map showing all aircraft currently being tracked by your ADS-B receiver.
- View multilateration (MLAT) results in SkyAware to track even more aircraft.
- Browse detailed statistics about the performance of your site.
- See which flights your site helped track in the tracklogs on flightaware.com.
- Receive the ADS-B Network News monthly email with tips and tricks to get the most out of your ADS-B receiver.
Build a PiAware Receiver
Easy-to-follow instructions are available that detail the process of purchasing, assembling, and setting up of a PiAware ADS-B receiver. It takes about 2 hours to set up a receiver and track flights in real-time (hardware costs around USD100/EUR80).
Install PiAware Software
If you already have a Raspberry Pi, it takes less than 5 minutes to install the PiAware software on it and start sharing live ADS-B with FlightAware.
